when i plug in my usb memory drive it prompts for driver. In XP no driver was needed . u simply went to my computer and opened up removable drive but not on my vista machine. This is getting to be a pain in the rear anyone know a solution.?
according to acer's website, this machine should have a slot for a flash card:
Acer 5710
5-in-1 card reader for optional MultiMediaCard™, Secure Digital card, Memory Stick®, Memory Stick PRO™ or xD-Picture Card™
Look around the sides of the laptop to see if there are any areas that would fit a card, and gently push them in. one will probably spring out.
Good Luck!
USB flash drive or any other flash memory drive is basically an EEPROM that means "Electrically Erasable Programmable Read Only Memory".
USB flash memory sticks are nothing but an assembly of EEPROM, a controller with a RISC microprocessor, RAM and ROM. All of this interacts with a computer using a USB controller and connector.Because USB sticks are EEPROM these can hold data for as long as 10 years. As these memory modules are shock proof and as these don't have a volatile memory are good enough to sustain shock and humidity to some extend that is casual abuse that includes run through a washing machine, or even dropped in coffee.UBS thumb drives normally don't require drivers but with few old operating systems like Windows 98 and Windows 95 you need drivers that are provided by the manufacturer. Latest OS consider USB drives as USB Mass storage devices and have built in support for these drives that means you don't need any drivers just plug in the drive and start using it.Some Linux versions might recognize it but won't let you use it until you manually mount the drive. To mount to drive manually use the command"mount -vfat (drive to mount) (directory to mount at)"Eg. "mount -vfat /dev/sda1 /mnt/usbdrive"Manufacturers are also coming up with systems that have bios support for USB that means you can boot from the small USB drive. There are different versions of operating systems coming up that can be installed on a ROM and are so small to fit a USB drive as well. Most of these OS versions are Linux based for example Damm Small Linux.USB drives are mainly used to carry personnel data. But you need to be very careful with your personnel data now days. You can have anything in your personnel data collection that you have forgotten for example bank account details or anything. Try using some encryption engine to secure your data. You can use encrypted file system over the USB drive but then you will be able to access your drive only at few computers not all. Or you can have a encryption application that can run without installation from your USB. The best would be to use biometric USB drives.
Did you find this article useful? For more useful tips and hints, points to ponder and keep in mind, techniques, and insights pertaining to Internet Business, do please browse for more information at our websites.http://www.allhottips.com http://www.bookstoretoday.com
USB flash drive or any other flash memory drive is basically an EEPROM that means "Electrically Erasable Programmable Read Only Memory".USB flash memory sticks are nothing but an assembly of EEPROM, a controller with a RISC microprocessor, RAM and ROM. All of this interacts with a computer using a USB controller and connector.Because USB sticks are EEPROM these can hold data for as long as 10 years. As these memory modules are shock proof and as these don't have a volatile memory are good enough to sustain shock and humidity to some extend that is casual abuse that includes run through a washing machine, or even dropped in coffee.UBS thumb drives normally don't require drivers but with few old operating systems like Windows 98 and Windows 95 you need drivers that are provided by the manufacturer. Latest OS consider USB drives as USB Mass storage devices and have built in support for these drives that means you don't need any drivers just plug in the drive and start using it.Some Linux versions might recognize it but won't let you use it until you manually mount the drive. To mount to drive manually use the command"mount -vfat (drive to mount) (directory to mount at)"Eg. "mount -vfat /dev/sda1 /mnt/usbdrive"Manufacturers are also coming up with systems that have bios support for USB that means you can boot from the small USB drive. There are different versions of operating systems coming up that can be installed on a ROM and are so small to fit a USB drive as well. Most of these OS versions are Linux based for example Damm Small Linux.USB drives are mainly used to carry personnel data. But you need to be very careful with your personnel data now days. You can have anything in your personnel data collection that you have forgotten for example bank account details or anything. Try using some encryption engine to secure your data. You can use encrypted file system over the USB drive but then you will be able to access your drive only at few computers not all. Or you can have a encryption application that can run without installation from your USB. The best would be to use biometric USB drives.
Did you find this article useful? For more useful tips and hints, points to ponder and keep in mind, techniques, and insights pertaining to Internet Business, do please browse for more information at our websites.http://www.allhottips.com http://www.bookstoretoday.com
USB flash drive or any other flash memory drive is basically an EEPROM that means "Electrically Erasable Programmable Read Only Memory".USB flash memory sticks are nothing but an assembly of EEPROM, a controller with a RISC microprocessor, RAM and ROM. All of this interacts with a computer using a USB controller and connector.Because USB sticks are EEPROM these can hold data for as long as 10 years. As these memory modules are shock proof and as these don't have a volatile memory are good enough to sustain shock and humidity to some extend that is casual abuse that includes run through a washing machine, or even dropped in coffee.UBS thumb drives normally don't require drivers but with few old operating systems like Windows 98 and Windows 95 you need drivers that are provided by the manufacturer. Latest OS consider USB drives as USB Mass storage devices and have built in support for these drives that means you don't need any drivers just plug in the drive and start using it.Some Linux versions might recognize it but won't let you use it until you manually mount the drive. To mount to drive manually use the command"mount -vfat (drive to mount) (directory to mount at)"Eg. "mount -vfat /dev/sda1 /mnt/usbdrive"Manufacturers are also coming up with systems that have bios support for USB that means you can boot from the small USB drive. There are different versions of operating systems coming up that can be installed on a ROM and are so small to fit a USB drive as well. Most of these OS versions are Linux based for example Damm Small Linux.USB drives are mainly used to carry personnel data. But you need to be very careful with your personnel data now days. You can have anything in your personnel data collection that you have forgotten for example bank account details or anything. Try using some encryption engine to secure your data. You can use encrypted file system over the USB drive but then you will be able to access your drive only at few computers not all. Or you can have a encryption application that can run without installation from your USB. The best would be to use biometric USB drives.
Did you find this article useful? For more useful tips and hints, points to ponder and keep in mind, techniques, and insights pertaining to Internet Business, do please browse for more information at our websites.http://www.allhottips.com http://www.bookstoretoday.com
USB flash drive or any other flash memory drive is basically an EEPROM that means "Electrically Erasable Programmable Read Only Memory".USB flash memory sticks are nothing but an assembly of EEPROM, a controller with a RISC microprocessor, RAM and ROM. All of this interacts with a computer using a USB controller and connector.Because USB sticks are EEPROM these can hold data for as long as 10 years. As these memory modules are shock proof and as these don't have a volatile memory are good enough to sustain shock and humidity to some extend that is casual abuse that includes run through a washing machine, or even dropped in coffee.UBS thumb drives normally don't require drivers but with few old operating systems like Windows 98 and Windows 95 you need drivers that are provided by the manufacturer. Latest OS consider USB drives as USB Mass storage devices and have built in support for these drives that means you don't need any drivers just plug in the drive and start using it.Some Linux versions might recognize it but won't let you use it until you manually mount the drive. To mount to drive manually use the command"mount -vfat (drive to mount) (directory to mount at)"Eg. "mount -vfat /dev/sda1 /mnt/usbdrive"Manufacturers are also coming up with systems that have bios support for USB that means you can boot from the small USB drive. There are different versions of operating systems coming up that can be installed on a ROM and are so small to fit a USB drive as well. Most of these OS versions are Linux based for example Damm Small Linux.USB drives are mainly used to carry personnel data. But you need to be very careful with your personnel data now days. You can have anything in your personnel data collection that you have forgotten for example bank account details or anything. Try using some encryption engine to secure your data. You can use encrypted file system over the USB drive but then you will be able to access your drive only at few computers not all. Or you can have a encryption application that can run without installation from your USB. The best would be to use biometric USB drives.
Did you find this article useful? For more useful tips and hints, points to ponder and keep in mind, techniques, and insights pertaining to Internet Business, do please browse for more information at our websites.http://www.allhottips.com http://www.bookstoretoday.com
when i try to open it i cannot open the memory card,instead of it, it was ask 'do you want to format or cancel. i don't want my file to lose in vain. please help me what is this and whether it was cause by a virus.
USB flash drive or any other flash memory drive is basically an EEPROM that means "Electrically Erasable Programmable Read Only Memory".
USB flash memory sticks are nothing but an assembly of EEPROM, a controller with a RISC microprocessor, RAM and ROM. All of this interacts with a computer using a USB controller and connector.Because USB sticks are EEPROM these can hold data for as long as 10 years. As these memory modules are shock proof and as these don't have a volatile memory are good enough to sustain shock and humidity to some extend that is casual abuse that includes run through a washing machine, or even dropped in coffee.UBS thumb drives normally don't require drivers but with few old operating systems like Windows 98 and Windows 95 you need drivers that are provided by the manufacturer. Latest OS consider USB drives as USB Mass storage devices and have built in support for these drives that means you don't need any drivers just plug in the drive and start using it.Some Linux versions might recognize it but won't let you use it until you manually mount the drive. To mount to drive manually use the command"mount -vfat (drive to mount) (directory to mount at)"Eg. "mount -vfat /dev/sda1 /mnt/usbdrive"Manufacturers are also coming up with systems that have bios support for USB that means you can boot from the small USB drive. There are different versions of operating systems coming up that can be installed on a ROM and are so small to fit a USB drive as well. Most of these OS versions are Linux based for example Damm Small Linux.USB drives are mainly used to carry personnel data. But you need to be very careful with your personnel data now days. You can have anything in your personnel data collection that you have forgotten for example bank account details or anything. Try using some encryption engine to secure your data. You can use encrypted file system over the USB drive but then you will be able to access your drive only at few computers not all. Or you can have a encryption application that can run without installation from your USB. The best would be to use biometric USB drives.
Did you find this article useful? For more useful tips and hints, points to ponder and keep in mind, techniques, and insights pertaining to Internet Business, do please browse for more information at our websites.http://www.allhottips.com http://www.bookstoretoday.com
My laptop is a few years old with a memory card reader.I have a new San Disk SD memory card(2G) for my camera and one for my psp,and have had other memory cards previously for my camera.They all have worked in my laptop before, and the psp's card still reads.
The problem is:when I use the card for my camera sometimes the laptop registers a card on Drive E,sometimes not.When it does and I try to retrieve pics by double clicking, it says "card not formatted, would you like to format"?If I click no, it exits and won't read the card. If I click yes and try to format, it goes through the process to quit at the end and give me an error that says "windows can't format".I can format the card from the camera,which registers that there are pics on the card.After dumping pics via usb,I format the card from the camera and get the same message.
I have to transfer pics by usb, which is a pain.I only have a problem with this card.What's the deal?What do I have to do to fix it?
My laptop is a few years old with a memory card reader.I have a new San Disk SD memory card(2G) for my camera and one for my psp,and have had other memory cards previously for my camera.They all have worked in my laptop before, and the psp's card still reads.
The problem is:when I use the card for my camera sometimes the laptop registers a card on Drive E,sometimes not.When it does and I try to retrieve pics by double clicking, it says "card not formatted, would you like to format"?If I click no, it exits and won't read the card. If I click yes and try to format, it goes through the process to quit at the end and give me an error that says "windows can't format".I can format the card from the camera,which registers that there are pics on the card.After dumping pics via usb,I format the card from the camera and get the same message.
I have to transfer pics by usb, which is a pain.I only have a problem with this card.What's the deal?What do I have to do to fix it?
People Say…